Demilec Insulation Service in Austin, TX | Super Green Insulation Austin
When your Demilec spray foam insulation needs expert attention, Super Green Insulation Austin is the team Austin homeowners and contractors call first. As an independent Demilec service provider — not affiliated with Demilec directly — we bring 16-plus years of hands-on experience with Demilec’s full product lineup to every job in the Austin metro. Whether you’re in Cedar Park, South Congress, or Pflugerville, our technicians know these systems inside and out. Call us today at (866) 434-2901 to schedule your service.
Why Trust Super Green Insulation Austin for Your Demilec Insulation?
Tom Hopkins built Super Green Insulation Austin on one principle: genuine product knowledge beats a sales pitch every time. Our technicians have completed hands-on training specific to Demilec’s two-component spray polyurethane foam systems — including proper A-side and B-side ratio verification, off-ratio foam identification, and correct substrate adhesion testing protocols that Demilec’s own technical guidelines require.
We stock OEM-compatible components that meet Demilec’s published chemical and performance specifications, so your existing system’s warranty integrity stays intact. That matters a lot in Austin, where the August heat pushes attic temperatures above 140°F and a substandard repair can degrade foam cell structure within a single cooling season. With 784 verified reviews averaging 4.9 out of 5 stars, Austin residents consistently tell us the same thing: we explain what we found, fix what’s broken, and don’t oversell. That’s the Super Green standard, and it’s why we’re trusted with Demilec systems throughout the region.
Common Demilec Insulation Problems We Fix in Austin
- Off-Ratio Foam Shrinkage in Heatlok Soy 200 Applications — Demilec’s Heatlok Soy 200 closed-cell product is excellent, but when it was applied at incorrect mixing ratios during original installation, the foam cures brittle and pulls away from framing over time. In older homes in Mueller and Brentwood, we regularly identify this issue during energy audits and re-spray affected sections to restore the air barrier.
- Yellowing and Surface Degradation in Agribalance Open-Cell Foam — Demilec’s Agribalance open-cell product is bio-based and performs beautifully when protected, but UV exposure in unconditioned Austin garages and crawl spaces causes surface oxidation and discoloration. We assess whether the degradation is cosmetic or structural and apply appropriate coatings or foam replacement as needed.
- Air Gaps at Rim Joists and Band Boards — Demilec closed-cell products applied to rim joists in Austin’s pier-and-beam homes frequently develop micro-gaps after years of wood seasonal movement. These gaps are invisible to the eye but show up clearly on our infrared thermal imaging scans, and filling them typically cuts clients’ cooling bills noticeably within the first summer.
- Inadequate Thickness Causing Failed Energy Code Compliance — Austin’s current energy code requires minimum R-values that some older Demilec installations don’t meet — especially in homes built or re-insulated before the 2021 IECC adoption. Tom Hopkins flags these during every inspection, and we bring foam depth up to current Austin Building Code standards with Demilec-compatible topcoat layers.
- Thermal Bridging Through Metal Framing in Commercial Builds — Austin’s booming commercial construction sector sees a lot of light-gauge steel framing, and Demilec’s Heatlok HFO High Lift product is popular in these applications. When the initial pass missed full stud-cavity fill, thermal bridges develop and show up as hot streaks on infrared cameras in summer. We diagnose and correct these without disturbing surrounding finishes wherever possible.
Our Demilec Service Process
Every Demilec service call at Super Green Insulation Austin follows a structured process designed around Demilec’s own technical documentation — not guesswork.
Step 1 — Diagnostic Assessment: We start with a visual inspection combined with FLIR infrared thermal imaging to map air leakage, moisture intrusion, and foam voids. For Demilec closed-cell applications, we also perform a density spot-check to verify the foam cured at the correct 2.0 lb/ft³ specification.
Step 2 — Repair or Installation: Depending on findings, we either cut out and re-spray compromised sections using Demilec-compatible two-component SPF systems or build up insufficient thickness with compatible product. All mixing ratios are verified with calibrated proportioning equipment before foam touches your structure.
Step 3 — Post-Application Testing: We re-scan with thermal imaging and conduct a blower door test where scope allows to confirm the air barrier is restored to Demilec’s published performance specifications.
Step 4 — Documentation: You receive a written service report — useful for warranty claims, Austin Building Department inspections, or future buyers during a home sale.
Demilec Products We Service & Install in Austin
Our Austin team works across the full Demilec product range, including:
- Heatlok Soy 200 Plus — 2.0 lb closed-cell spray foam, our most frequently serviced Demilec product in Austin residential attics
- Heatlok HFO High Lift — next-generation low-GWP closed-cell, increasingly common in Austin’s new construction and commercial projects
- Agribalance — open-cell bio-based foam used widely in interior walls throughout Austin’s green-build community
- Sealection 500 — open-cell product favored in Austin’s mid-century modern renovations for its sound-dampening qualities
We keep commonly needed Demilec-compatible components on our service vehicles, which means most Austin service calls don’t require a parts delay.
We Also Service These Brands
While Demilec is a core specialty, Super Green Insulation Austin’s technicians are equally experienced with Owens Corning fiberglass systems, Johns Manville spray foam and batts, Knauf EcoBatt products, and Rockwool stone wool insulation. If your Austin home or commercial property uses multiple insulation types across different zones — which is very common — we can assess and service all of them in a single visit.
FAQs — Demilec Insulation Service in Austin
We are an independent Demilec service provider, not a factory-authorized dealer or affiliate of Demilec. That means we’re not bound by territory restrictions or brand quotas — we service Demilec products because our Austin clients own them and trust us to maintain them correctly, using our 16-plus years of SPF system experience and Demilec’s published technical specifications as our guide.
We use OEM-compatible components that meet or exceed Demilec’s published chemical and physical performance specifications for every repair. When a situation calls for an exact Demilec-branded product — particularly for warranty-sensitive repairs — Tom Hopkins will be upfront about sourcing options and timelines during your diagnostic call.
Most residential Demilec service appointments in Austin run between two and four hours, depending on the scope of foam replacement needed and attic or crawl space accessibility. Larger commercial Demilec jobs — common in Austin’s East Sixth Street corridor renovations — typically require a full day or a scheduled multi-day engagement. We give you a time estimate before work begins, not after.
We cover all major Demilec spray polyurethane foam product lines currently in use across the Austin market, including Heatlok Soy 200 Plus, Heatlok HFO High Lift, Agribalance open-cell, and Sealection 500. If you’re unsure which Demilec product is in your home, our diagnostic process will identify it from visual and density characteristics before any repair begins.
Yes — all Demilec repair and installation work performed by Super Green Insulation Austin carries our own workmanship warranty, which we’ll detail in writing before your job starts. This covers labor and material application quality. We’ll also advise you on how our service interacts with any existing Demilec manufacturer’s warranty on your original installation, so there are no surprises down the road.
Book Your Demilec Service in Austin, TX
Ready to get your Demilec insulation performing the way it should in Austin’s demanding climate? Call Super Green Insulation Austin at (866) 434-2901 to schedule your diagnostic appointment. Tom Hopkins and our Austin team are ready to help — no pressure, no upsell, just honest Demilec expertise delivered to your door.
Written by the team at Super Green Insulation Austin, serving Austin since 2008.